Technical data

Rittal Modular Safe LMS 9.3 Operation and functionality
We reserve the right to make technical changes Version 2.2
Operator Manual Page 39
Short instructions on the revision opening
To cut it:
4.1.3 Electronic lock prepared for activation by an access control system
Electronic lock (Option)
Scope of delivery/characteristics:
(picture shows front
operating panel)
• 12 V or 24 V model
• Three-sides locking bolts
• Input unit: Plastic, grey (RAL 7012)
• The reader or control unit is not included in the scope of delivery
• Power supply via the on-site reader unit
The electronic lock for activation by an on-site access control system is integrated into the safe door. The
cable for on-site connection is supplied inside the safe.
The connection diagram is shown below.
A voltage supply of 12 V DC or 24 V DC must be made available on site by the access control system for the
release time.