Technical data

Rittal Modular Safe LMS 9.3 Operation and functionality
We reserve the right to make technical changes Version 2.2
Operator Manual Page 36
Opening when opening delay/ ready-to-open time is programmed
Step Display
1. Press ON.
2. Enter a valid code. 1 x
Automatic beginning of the opening delay: visual signal every 5 seconds.
After expiration of the opening delay: acoustic signal.
1 x
Automatic beginning of the ready-to-open time: visual signal every 5 seconds.
/
3. Enter the valid code during the ready-to-open time again. 1 x
4. Turn the knob within 4 seconds clockwise until you can turn it no further.
Pressing the P button within the opening delay will cancel this function. To open once again, the procedure
will have to be repeated from the beginning.
Three codes can be entered within the ready-to-open time. If the wrong code is entered three times, the
procedure will have to be repeated from the beginning. The opening delay/ready-to-open time can be passed
over using the revision key (see page 37).
Deleting of the programmed opening delay/ ready-to-open time
Step Display
1. Open the lock with a valid code.
2. Press ON.
3. Press P.
4. Enter the valid code again.
5. Press P.
6. Press 1 when entering opening delay/ready-to-open time
- First code with the parallel mode
- First code in the delegated double code mode
- double code in simple double code mode
Press 2 when entering opening delay/ready-to-open time
- second code in the parallel mode
- double code in the delegated double code mode
7. Press 000 (opening delay/ready-to-open time is set to “0”). 1 x
⇒ opening
delay/
ready-to-
open time
deleted