Technical data

Rittal Modular Safe LMS 9.3 Operation and functionality

We reserve the right to make technical changes Version 2.2

Operator Manual Page 35

Switching from simple double code mode to parallel mode: Changing from double code to first code

During deletion, the first partial code is applied as the new first code.

Pressing the key combination P and 0 deletes all programmed functions (opening delay, ready-toopen

time).

Step Display

1. Open the lock with a valid double code (see page 31).

2. Press ON.

3. Press P.

4. Enter the valid double code again.

5. Press P. 1 x

6. Press 0. 1 x

⇒ 2. Par-

tial code

deleted

Closing

See page 30.

Opening delay and ready-to-open time functions

The opening delay is the time at the end of which it will be possible to open the lock. The ready-to-open time

is the time during which the lock can be opened once time opening delay has elapsed. An opening delay and

a ready-to-open time can be assigned to every valid code.

Enabling/Changing of the opening delay/ ready-to-open time

Step Display

1. Open the lock with a valid code.

2. Press ON.

3. Press P.

4. Enter the valid code again.

5. Press P.

Press 1 when entering opening delay /ready-to-open time for:

- First code in parallel mode

- First code in delegated double code mode

- Double code in simple double code mode

Press 2 when entering opening delay /ready-to-open time for:

- Second code in parallel mode

- Double code in delegated double code mode

7. Entry of a two-figure opening delay (01-99 minutes) and

a single-figure ready-to-open time (1-9 minutes)

Example: 092 for 9 minutes opening delay and 2 minutes ready-to-open time

1 x

Test the new opening delay and ready-to-open time just programmed by closing and

opening the lock again.