Technical data

Rittal Modular Safe LMS 9.3 Operation and functionality
We reserve the right to make technical changes Version 2.2
Operator Manual Page 29
Changing the first code by the owner of the first code
Step Display
1. Open the lock with a valid 6-digit first code (see page 28).
2.
Press ON
.
3. Press P.
4. Enter the valid 6-digit first code.
5. Enter the new 6-digit first code.
/ 2 x
6. Enter the new 6-digit first code again.
1x
7. Test the new first code just programmed by closing and opening the lock again.
In case the new first code was incorrectly confirmed, the signal
is given three times.
Repeat the procedure starting at step 2.
Enabling/Changing the second code by the owner of the first code
Step Display
1. Open the lock with a valid 6-digit first code (see page 28).
2.
Press ON
.
3. Press P.
4. Enter the valid 6-digit first code.
5. Press P.
6. Press 3.
7. Enter the new 6-digit second code.
/ 2 x
8. Enter the new 6-digit second code again.
1 x
9. Test the new second code just programmed by closing and opening the lock again.
In case the new second code was incorrectly confirmed, the signal
is given three times.
Repeat the procedure starting at step 2.
Changing the second code by the owner of the second code
Step Display
1. Open the lock with a valid 6-digit second code (see page 28).
2.
Press ON
.
3. Press P.
4. Enter the valid 6-digit second code.
5. Enter the new 6-digit second code.
6. Enter the new 6-digit second code again. 1 x
7. Test the new second code by closing and opening the lock again.
If the new second code entered in step 6 has been incorretly confirmed the signal
is given three times.
Repeat the procedure starting at step 2.