Technical data

Rittal Modular Safe LMS 9.3 Operation and functionality
We reserve the right to make technical changes Version 2.2
Operator Manual Page 23
NOTICE
Caution: Risk of the safe tipping over when the doors are opened 180°
when the housing is empty!
4.1.1 Mechanical key lock
NOTICE
2 keys are standardly supplied. All keys must be kept in a safe place
that is inaccessible to unauthorized persons. If a key is lost, the lock
must be exchanged!
Keep the keys as clean as possible.
The lock must not be oiled or greased.
Opening the safe (right side)
Step
1. Turn the cover of the lock to the top.
2. Insert the key in the key guide and turn to the right.
3. Turn the handle left and to the stop, and then open the safe door.
Closing the safe
Step
1.
On the side of the door, opposite the hinges, slowly push the safe doors closed, until the handle can
be turned into a vertical position. An air cushion will be created, if the safe door is closed too quickly,
which prevents the closing of the safety door.
2. Turn the key in the key guide left, up to the stop.
3. Remove the key.
4. Turn the lock cover downwards.