Technical data

Rittal Modular Safe LMS 9.3 Description of product
We reserve the right to make technical changes Version 2.2
Operator Manual Page 14
2.5 Cable ducts
HINWEIS
Expansions in the already installed cable bulkhead must only be done
by duly authorized service personnel, otherwise all warranty claims will
be rendered null and void! Inform the manufacturer if additional lines
or cables are to be inserted into a cable bulkhead.
2.5.1 Soft bulkhead
The soft bulkhead is made from flexible material which is installed around the data and power supply cables
to be routed in the modular safe. The cables to be routed must be installed individually. In order to safeguard
the warranted characteristics against potential external risks, cables routed in the modular safe must not be
bundled (grouped). A protective coating is also applied to the data and power supply cables, which do not
always follow a linear route, to provide additional protection around the cable duct.
2.5.2 Hard bulkhead (filler pieces)
An optional hard bulkhead system can also be used for the cable ducts to obtain a higher level of security
against manipulation. Before closing the cable duct opening, a stabilisation bar must be mounted on the
lower end of the frame. This ensures that the compressive pressure of the hard bulkhead is stabilised.