Operation Manual

English
59
6.4 Enter PIN code
Note!
The factory-set PIN code only needs to be entered during the
initial start-up.
The factory-set PIN code is [0 0 0 0].
Entering the factory-set PIN code
1. Use the corresponding [arrow keys] (1) or (2) to select
the corresponding digits and con rm each one with the
[multifunction key] (3).
2. Enter the next 3 required digits in the same way.
3. Following this, the LCD display shows the [Change PIN]
dialog box.
6.5 Changing the PIN code
1. Enter a new PIN and repeat.
2. Con rm the last entry with [multifunction key] (3)
After this, the LCD display shows the [Date dialog box].
6.6 Setting/changing the date
Note!
Enter the date and time correctly, because further
programming depends on the date and time.
When entering the year (YYYY), it is only necessary to enter
the last two digits because the  rst two 20XX are preset.
1. Use the corresponding [arrow keys] (1) or (2) to select
the corresponding digits and con rm each one with the
[multifunction key] (3).
After con rming, the LCD display shows [Time dialog box].