Operation Manual

5.5 Laying the cable around obstacles

 When laying the cable around obstacles, maintain the

distances shown in the illustration.

min. 30 cm

 When the distance is at least 30 cm, the robot lawnmower

interprets the distance as a path and moves around the

obstacle.

Note!

If there is a distance of 0 cm between the cables, it is

possible for the cable to be driven over.

min. 30 cm

0 cm

5.6 Connecting the boundary cable to the

base station

1 2

 Remove the insulation from the boundary cable (2) after

laying the cable and connect to the spring terminals (1).

5.7 Connecting the low-voltage cables to the

transformer

 Strip 10 mm of insulation o the low-voltage cables (3) and

(4).

 Unscrew the screws with a screwdriver (2) and connect the

low-voltage cables (3) and (4) to the transformer (1).

 The cables can be connected to either terminal, there is no

need to observe a particular polarity.

 Insert the mains plug of the transformer into the mains

socket.