Operation Manual

English
77
15 Repair
Warning!
Injuries due to the cutting blades!
n Switch off the robot lawnmower at the
[ON/OFF key] before starting maintenance
and repair work.
n Always wear working gloves when
carrying out maintenance and care
jobs on the blade system.
n Disconnect the transformer of the base
station from the mains.
Important!
Damage due to an incorrect repair!
n Never repair damaged cutting attachments
by welding, straightening or modifying the
shape. This may cause parts of the cutting
tool to come off and result in serious or
fatal injuries.
15.1 Renewing the cutting blade plate
1
2
3
1 Place the robot lawnmower with the cutting blades (3)
pointing upwards.
2 Hold cutting blade plate (2)  rmly.
3 Unscrew and remove three screws (1).
4 Pull o cutting blade plate (2) with the cutting blades (3).
5 Put on cutting blade plate (2) with the cutting blades (3).
6 Brace cutting blade plate (2)  rmly.
7 Screw in and tighten new screws (1).
Renewing the transformer fuse
1
Warning!
Danger of  re due to  tting an incorrect fuse
or jumpering the fuse.
n Always use a fuse with the same amp
rating.
n Never jumper the fuse.
1 Disconnect the transformer mains plug.
2 Using a  at-blade screwdriver, carefully press in bayonet
lock (1) at the same time as opening anticlockwise.
Bayonet lock (1) springs out slightly.
3 Renew the fuse and close bayonet lock (1) by turning
clockwise with the  at-blade screwdriver.