Operation Manual

English
75
13 Transport
1 2
n When transporting within the mowing area:
1 Stop the robot lawnmower using [STOP key] (2).
2 Switch o robot lawnmower at [ON/OFF key] (1).
Caution!
Injuries due to the cutting blades!
n The blades will come to a stop in 2 seconds!
n Make sure the cutting blade plate is
pointing away from your body.
2
1
3 Only carry the robot lawnmower by its handle (1).
14 Maintenance
Warning!
Injuries due to the cutting blades!
n Always switch off the robot lawnmower
at the [ON/OFF key] before starting
maintenance and repair work.
n Always wear working gloves when
carrying out maintenance and care
jobs on the blade system.
n Disconnect the transformer of the base
station from the mains.
Important!
Damage to the electrical/electronic system
by incorrect cleaning!
n Do not clean the robot lawnmower with
a high-pressure cleaner or under running
water. Water penetration can cause
irreparable damage to the switch, battery
and circuit boards.
n Entrust all repairs (apart from replacement of the blades) to
specialist workshops approved by the manufacturer.
The user is under obligation:
1. To bring the robot mower to the workshop after
between 100 and 200 hours operation, for:
• Check on tightness of bolts
• General check on programming and detection of
possible errors
2. To bring the robot mower to the workshop after 500
and 2500 hours operation, for:
• General check on tightness of bolts and mechanical
parts
• Check on error statistics
• Check on battery status
• Check on wheel bearings
• Inspection of blade and check for possible damage
• General inspection and cleaning
Operations to be carried out periodically by the user
• Once a week, clean the robot lawnmower thoroughly
with a hand brush or a cloth, and use care spray if
necessary. Contamination can impair the function of
the machine if not removed.
• Once a week, check the cutting blades for damage.