Operation Manual

English
73
10.6 Activating or deactivating the rain sensor
n In the Settings sub-menu, select [Rain sensor].
n Con rm with the [multifunction key right].
n Activate or deactivate the rain sensor with the
[multifunction key right].
n Exit setup mode by pressing the [Menu key] twice.
10.7 Setting the rain sensor delay
Note!
n The purpose of the [Rain sensor delay] function is to
instruct the robot lawnmower to move back out of the
base station after a time delay, after it has returned to
the base station.
1 In the Settings sub-menu, select [Rain sensor delay].
2 Con rm with the [multifunction key right].
3 Set the [Rain sensor delay].
4 Use the [multifunction key left] to return to the main menu.
n Exit setup mode by pressing the [Menu key] twice.
10.8 Changing the display contrast on the
LCD display
1 In the Settings sub-menu, select [Display contrast].
2 Select [Display contrast] with the [arrow keys] and con rm
with the [multifunction key right].
n Exit setup mode by pressing the [Menu key] twice.
10.9 Restoring factory settings
1 In the Settings sub-menu, select [Factory settings].
2 Enter the PIN code again and con rm.
n Exit setup mode by pressing the [Menu key] twice.
11 Information menu
n Hardware information comprising, e.g.
n Product name.
n Year of manufacture.
n Number of operating hours.
n Serial number.
n Distance covered.
n Software status with version number.
Note!
n The Information menu is used for calling up various
information such as software status, hardware status
and current settings.
n No settings can be made in this menu.
Selecting the program
n Before programming, it is necessary to perform the start
procedure, see Starting the robot lawnmower on page 67.
1. Use the [up arrow key] or the [down arrow key] to select
the [Information] menu item and confirm with the
[multifunction key right].
11.1 Hardware information
1. Use the [up arrow key] or the [down arrow key] to select
the [Hardware or software] menu item.
2. Con rm with the [multifunction key right].
3. Call up the corresponding hardware or software
information.
4. Use the [multifunction key left] to return to the main menu.