Operation Manual

English
69
9 Program menu
Note!
Description of function keys, see page 45.
n Make the settings in the week program.
n Program the entry points.
n Look at the program info, e.g. mowing program.
Selecting the program
n Before programming, it is necessary to perform the start
procedure, see page 67 .
1. Use the [up arrow key] or the [down arrow key] to select
the Programs menu item.
2. Con rm with the [multifunction key right].
3 Select the required programs and confirm with the
[multifunction key right].
n The symbol [X] shows the currently active day of the week.
9.1 Setting the week program
1 In the week program, the days of the week (2) and the
times are set when the robot lawnmower should mow
automatically.
2 In the [All days] menu item (1), the robot lawnmower mows
at the set times every day.
3 Observe the mowing result and mow as long as necessary
in order to obtain a well kept lawn.
4. Use the corresponding [arrow keys] to select the required
menu point and con rm with the [multifunction key right]
in each case.
Mowing time setting in batch mode
1. Select the required menu item, [Every day], with the [arrow
keys] and con rm with the [multifunction key right].
2. Press the [down arrow key] until [Change] is active.
1. Select the required menu item with the [arrow keys] and
con rm with the [multifunction key right].
Explanation of symbols:
n (3) [-] Mowing window deactivated.
n (3) [R] Edge mowing.
n The robot lawnmower mows left and right along the
boundary cable. After mowing the edges, the robot
lawnmower continues mowing the marked-out area
[M] Normal mowing
n The robot lawnmower mows the entire area marked out
by the boundary cable
n (4) Start time
n The robot lawnmower departs from the base station at
the selected time for mowing.