Operation Manual

English
67
8 Programming
8.1 Starting the robot lawnmower
Note!
In order to access the program menus of the robot
lawnmower, it is necessary to perform this start procedure in
all cases.
n If necessary, switch on the robot lawnmower by pressing
the [ON/OFF key] (1), then enter the PIN code.
n After switch-on, information is given regarding the next
mowing and the current mowing duration
Note!
The displayed mowing operation may be the factory
setting, unless a new mowing operation has already been
programmed.
Note!
The PIN code may also be the factory code if no di erent
code was entered during calibration.
n After the PIN code has been entered, the [Next mowing]
information appears again.
n The robot lawnmower is now ready for the programs and
settings to be selected.
Selecting the menu
n After switching on, it is possible to call up the main menu
with the [menu key] (1).