Operation Manual

29EN
Environmental protection should be a
priority of considerable importance when
using the machine, for the benet of both
social coexistence and the environment in
which we live.
– Try not to cause any disturbance to the
surrounding area.
– Scrupulously comply with local
regulations and provisions for the
disposal of waste materials after
sawing.
– Scrupulously comply with local
regulations and provisions for the
disposal of oils, petrol, damaged parts
or any elements which have a strong
impact on the environment; this waste
must not be disposed of as normal
waste, it must be separated and taken
to specied waste disposal centres
where the material will be recycled.
– At the time of decommissioning, do not
pollute the environment.
Only blades with the following codes must
be used on this machine:
Mod.92:
82004345/1 - 82004344/1
82004354/0 - 82004353/0
Mod.102:
82004341/1 - 82004340/1
82004348/0 - 82004347/0
IMPORTANT
Both of the blades
should be replaced together, especially
when there are slight dierences in
wear.
6.3.6 Dismantling, replacing
and remounting the blades
WARNING!
Always wear work
gloves when handling the blades.
WARNING!
Damaged or bent
blades must always be replaced;
never try to repair them! ALWAYS
USE ORIGINAL BLADES BEARING
THE SYMBOL
!
7.
ENVIRONMENTAL PROTECTION