Operation Manual

26EN
When retting
the plug (2)
make sure
the seal (3)
is positioned
correctly and
tighten it as far
as possible,
holding the
extension tube
(1) rmly in
place.
6.2.1 Engine
IMPORTANT
Follow all the
instructions in the engine manual.
To empty the oil from the engine, hold
the extension tube (1) rmly in place and
unscrew the drain plug (2).
The boxes at the side are for you to mark
the date or number of working hours at
which the intervention was made.
6.2 ROUTINE MAINTENANCE
The table is to help you maintain your
machine’s safety and performance.
It summarises the main interventions to
be made and the frequency applicable to
each of them.
1)
See the engine manual for the full list and frequency.
2)
At the rst signs of any malfunction, contact your Dealer imme diately.
3)
The operation must be carried out by your Dealer or a specialized Service Centre.
4)
General lubrication should also be carried out whenever the machine is to be left unused for a long period.
1
3
1
2
Operation Hours Completed (Date or Time)
1. MACHINE
1.1 C
heck of fastening and sharpness of blades
3)
25
1.2 Blade replacement
3)
100
1.3 Transmission belt check
3)
25
1.4 Transmission belt replacement
2) 3)
–
1.5 Blade belt check
3)
25
1.6 Blade belt replacement
2) 3)
–
1.7 Drive adjustment and check
3)
25
1.8 Blade brake and engagement check
3)
25
1.9 Bolt and screw check 25
1.10 General lubrication
4)
25
2. ENGINE
1)
2.1 Engine oil change .....
2.2 Air lter cleaning and check .....
2.3 Air lter replacement .....
2.4 Fuel lter check .....
2.5 Fuel lter replacement .....
2.6 Spark plug contacts check and cleaning .....
2.7 Spark plug replacement .....