Operation Manual

32EN
PROBLEM LIKELY CAUSE SOLUTION
10. Unusual
vibrations while
working
– cutting deck is full of grass
– blades are unbalanced or loose
– bolts and screws are loose
– clean the cutting deck (
5.4.10)
– contact Your Dealer
– check and tighten all the engine and
frame bolts
11. Uncertain or
ineective braking
– the brake is not adjusted correctly – contact Your Dealer
12. Erratic forward
movement, poor
drive when going
uphill or if the
machine has a
tendency to rear up
– problems with the belt or the
engagement device
– contact Your Dealer
13. With the
engine running,
the machine does
not move when
the drive pedal is
pressed
(for hydrostatic
drive models)
– move the disengagement lever to
position «B»
– move it to position «A» (
4.33)
If problems continue after having carried out these operations, contact your dealer.
WARNING!
Do not take on complicated repair work if you don’t have the
necessary equipment or the technical knowledge. The warranty is automatically
voided and the manufacturer is not held responsible if repairs are done badly.