Operation Manual

33EN
If problems continue after having carried out these operations, contact a Licensed Service Centre.
Do not take on complicated repair work if you don't have the necessary equipment and the technical
knowledge. The guarantee is automatically revoked and the manufacturer declines all responsibility for any repairs which
are badly done.
WARNING!
10. The blade does
not engage or does not
stop promptly when it
is disengaged
11. Uncertain or
ineffective braking
12. Erratic forward
movement, poor drive
when going uphill or
if the machine has a
tendency to rear up
13. Unusual vibrations
while working
– forward speed too high compared to height
of grass
– collector channel is obstructed
– cutting deck full of grass
– problems with the engagement system
– the brake is not adjusted correctly
– problems with the belt or the engagement
device
– the blade is imbalanced
– blade loose
– fixing screws loose
– cutting deck is obstructed
– reduce forward speed and/or raise the cut-
ting deck
– wait for grass to dry
– remove the grass-catcher and empty the
collector channel
– clean the cutting deck
– contact a Licensed Service Centre
– contact a Licensed Service Centre
– contact a Licensed Service Centre
– contact a Licensed Service Centre
– contact a Licensed Service Centre
– check and tighten all the fixing screws of
engine and the machine
–
remove the grass-catcher, empty the collector
channel and clean the inside of the cutting deck
PROBLEM SITUATION LIKELY CAUSE SOLUTIONS
Key in «ON», engine
running
Key in «ON», engine
running
Key in «ON», engine
running
Key in «ON», engine
running