Operation Manual

16EN

a) Operating functions

According to the type of machine engine,

some of the following functions may not be available.

1. Hour counter. Indicates the

total number of engine running

hours.

The ma-

chine needs servicing after a

certain number of hours. This is indicated by the display, which

opens the “Hour counter” function and flashes for approx. 2 min-

utes, regardless of what functions are running.

2. Voltmeter. Indicates the bat-

tery charge level.

3. Speed indicator. Indicates

the engine’s rotation speed with

a series of asterisks, i.e.

NOTE

The flashing light indicates that the engi-

ne’s rotation speed is not suitable for cutting grass.

4. 24-hour clock (if fitted)

You can change the time with the key turned to «ON» and the

engine off, by following the steps below:

– press the «MODE» button several times to bring up the clock

icon;

– press the «MODE» button until the first two digits flash (hour);

– press one of the side buttons (a – b) to increase or decrease

by a unit;

– press the «MODE» button until the other two digits flash (min-

utes);

– press one of the side buttons to increase or decrease by a

unit;

– press «MODE» to complete your setting.

The clock has a buffer battery. When it

runs out, contact an Authorized Service Centre.

b) Auxiliary functions

5. Grass-catcher full light. Together with the inter-

mittent sound warning, it indicates that the grass-

catcher is full.

NOTE

engine at minimum speed

travelling speed

cutting speed