Specification Sheet

Document Name
Document No.
Date
Page
LIR2032
Specification
ZJQM-RD-SPC-H0339
2019-4-19
4/9
5. Battery Characteristics
电池性能
5.1 Charge and Discharge Characteristics 电池充放电性能
No.
Item
Test Instructions 试方法
5.1.1
Standard Charge/Discharge
标准充/放电
In a temperature of 25, CC charge 0.2CmA / voltage up to 4.20V. Then CV
charge. Terminate charging when the charging current value is less than
0.05CmA. Rest for no more than 10 minutes, discharge CC at 0.2CmA to
2.75V.
在环境 25℃的条件,以 0.2CmA 恒流充电,当电池端电压达到
电限制电压 4.20V 后,转为恒压充电,当电流值小于 0.05CmA 终止充
电并放置不超 10 分钟,再以 0.2CmA 电流恒流放电到 2.75V
5.1.2
Fast Charge/Discharge
快速充/放电
Temperature 25, CC charge at 1.0CmA to 4.20V, turn to CV charge.
Terminate charging when the charging current value is less than 0.05CmA,
rest for no more than 10 minutes, then at 1CmA CC discharge to 2.75V.
在环境温度 25℃的条件下,以 1CmA 恒流充电,当电池端电压达到充电
限制电压 4.20V ,转为恒压充电,当电流值小于 0.05CmA 时终止充电
并放置不超过 10 分钟,再 1CmA 电流恒流放电到 2.75V
Note: Unless otherwise specified, all tests stated in this specification are conducted at the following conditions:
Temp.: 25, Relative Humidity: 75±5%, Atmosphere Pressure: 1atm.
备注:除特别说明外,本产品规格书规定的测试条件为:温度 25℃,相对湿度 75±5%,大气压力 1atm
5.2 General Features 主要特点
No.
Item
Criteria 标准
5.2.1
Long Cycle Life
使用寿命长
Under normal usage, the cycle life of the battery can be ≥300 circles while
with capacity 80%
在标准充放电条件下,可循环使用充放电周期≥300 周,容量≥80%
5.2.2
High Power Density
高能量密度
High power density makes the battery light in weight and small in dimension.
It can be used in small devices.
高能量密度,使电池重量轻、体积小,方便使用于小型用电设备
5.2.3
Safe and Reliable
使用安全可靠
No floating metal lithium assures a safer usage.
没有游离的金属锂,电池使用更安全。
5.2.4
High working voltage
工作电压高
Working voltage is up to 3.7V, approx. 3 times of the voltage of NI-MH or
NI-CD, which reduces the quantity of the battery needed in certain
application.
工作电压高 3.7V,大约是镍镉或镍氢电池的 3 倍,可减少电池的使用
数量。
5.2.5
No memory effect
无记忆效应
No memory effect assures a constant maximum application.
无记忆效应,使其无时不为你提供最大的能量。
5.2.6
Low self-discharge rate
自放电率小
3%/month.
3%/月。