Specification Sheet
Document Name
Document No.
Date
Page
CR2025
Specification
ZJQM-RD-SPC-H0534
2019-4-30
6/11
6. Battery Characteristics 电池性能
Test condition: Temperature 20℃~25℃; Humidity 65±20%.
试验条件:温度 20℃~25℃;湿度 65±20%。
7. Characteristics Curves 性能曲线图
No
Item 项目
Standard 标准
Test Methods 测试方法
6.1
Capacity 容量
≥375h
Continuously discharge for 8 hours with load 7.5K Ω , till
2.0V end-voltage (for fresh battery only: within 3
months ).
负载7.5KΩ连续放电8小时,直至2.0V终止电压(仅适
用于新电池:3个月内)。
6.2
Vibration test
振动测试
Characteristics keep stability
特性保持稳定
Put battery on the platform
of
the
vibrations
machine, start
the machine and adjust the frequency form 10 times
per
minute to 15 times per minute. keep
it
running for an hour.
将电池放在振动机的平台上,启动机器并将频率表每分
钟调整10次至每分钟15次。让它运行一个小时。
6.3
Leakage at high
Temperature
高温泄漏
Leakage rate 泄漏率≤0.6%
Stored under temperature (45℃) for 30 days
在温度(45℃)下储存30天
6.4
Over discharge
Test
过放测试
No leakage allowed.
不漏液。
After 2.0V end-voltage, continuously discharged for 5
hours.
在2.0V终止电压后,连续放电5小时。










