Specification Sheet

Specifications
Electric Tankless Water Heater
HotMax with Heat Primed Technology
Complete dispensing system providing endless near-boiling water
MODEL NUMBER kW AMPS RECOMMENDED WIRE SIZE INLET FITTING OUTLET FITTING TURN ON (GPM) MAX FLOW (GPM)
VOLTS 240
C
HM013240
13 54 A 6 AWG 3/8" CF
proprietary - 4mm tube
(1/4" CF)
0.3 0.5 (at 60 PSI)
"C" indicates evaluation and compliance to either Underwriters Laboratories (UL) or Intertek (ETL) under CAN/CSA-C22.2 No. 64/No. 88.
Information and product specifications contained in this document are subject to change without notice.
© 2018 Eemax, Inc. All Rights Reserved. REV 2018-03
Eemax, 400 Captain Neville Drive, Suite 1, Waterbury, CT 06705
[phone] | [e-mail] | www.eemax.com
NOTE
unit is permanently
wired to electrical
system
Hot Water
Line
Cold Water
Line
Wire Connection
4.36" 5.73"
6.05"
1.95"
1.89"
0.67"
4.08"
5.51"
11.36"
Faucet Dimensions
Installation Considerations
2.56"
5.19"
1.07"
2.10"
1.12"
6.94"
12.00"
4.70"
Heater Dimensions
• Mount heater within 25" of the faucet ttings.
• Near-boiling water is assured at any location
regardless of ground water temperature
• Verify that your garbage disposal is capable of
withstanding temperatures up to 200°F
• Turn down the set point on the heater to compensate
for high altitude locations
• Separate 8 AWG ground conductor
• 60 A double pole breaker
• A lter may be installed ahead of the unit