Installation Guide and Manual

58
Optional GFCI
The optional GFCI consist of (A) Control Module
and (B) Current Transformer. This control module
has a LCD display indicating real-time
measurements. The GFCI module is preset from
factory to trip at 3.0 A.
Test and reset functions are carried out
automatically every 24 hours. To manual test the
GFCI, press the test button for a minimum of 1.5
seconds. To reset a tripped GFCI, cycle the power of
the unit. If equipped with a disconnect handle, turn
the handle to the “OFF” position then back to
“ON”.