Product Overview

15
Information and product specifications contained in this document are subject to change without notice. REV 2018-03.
Specifications
Electric Tankless Water Heater
AccuMix II
™
Ideal for Sensor or Metering Faucets – UPC 407.3 Compliant
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets ANSI/NSF 372
Note: Mounting location must be located
within 2 feet of fixture. Over 2 feet, contact
manufacturer.
Water Heater
in accordance
with NSF/ANSI
372 MH49688
Applications
• Handwashing
• Lavatory sinks
• Kitchen/bar/utility sinks
• Ideal for sensor or metering faucets
Performance Features
• Integrated mixing valve meets ASSE 1070
• Meets UPC 407.3 requirements when properly installed
• Active energy management with power modulating controls
• Silent Operation (except for AM012240T)
• Microprocessor temperature control with digital display for
thermostatic accuracy +/-1°F at steady ow rate
• Mounts in any orientation
• Low activation with 0.3 GPM turn on ow
• Proprietary purge technology engages upon installation to help
protect against dry-re occurrence
• Diagnostic feature displays error codes
• Continuous hot water – no storage capacity to run out
• Eemax exclusive turnkey solution
• Compatible with sensor and non-sensor faucets
• Factory Set to 105°F
• Cut energy waste – ow switch activates heater only on demand
(no standby heat loss)
• Save water and time by installing unit at point-of-use to eliminate
long pipe runs
• Easy installation – only one cold or hot water line need be
brought to installation – integral compression ttings are 3/8" (no
sweat connections)
• Reduces installation cost and materials
• No T&P relief valve needed (check local codes)
• High temperature limit switch (ECO)
• Warranty, ve (5) years limited on leaks, one (1) year parts
• Compact size ts almost anywhere for exible installation;
suitable for ADA compliant facilities
Product Specications
Dimensions: 13.75" H x 5.25" W x 4" D
Weight: 6 lb
Cover: ABS-UL 94 V-0 Rated
Color: White
Temperature: Factory set to 105°F
Minimum Operating Pressure: 35 PSI
Maximum Operating Pressure: 150 PSI
Element: Replaceable Ni Chrome cartridge insert
Fittings: 3/8" compression fittings
UL listed file number: E86887
U.S. Patent Pending Technology
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specication
Tankless water heater shall be an Eemax Accumix II model number
AM___________.
Unit shall have ABS-UL 94 V-0 rated cover. Unit shall have 0.3
GPM turn on. Unit shall allow mounting in any direction. Uses
ASSE 1070 approved integrated mixing valve to conform to UPC
407.3. Element shall be replaceable cartridge insert. Unit shall have
replaceable lter in the inlet connector. Element shall be iron free,
Nickel Chrome material. Tankless water heater to utilize complex
algorithm, actively managing power application to real time
system demand. Integrated ow meter, along with inlet and outlet
temperature sensors provide data which allows the unit to instantly
adapt to variations in input parameters. Heater shall be tted with
3/8" compression ttings to eliminate need for soldering. Maximum
operating pressure of 150 PSI. Diagnostic features to include error/
fault display. Hot water storage tanks prohibited. Unit shall be
Eemax or approved equal.
AccuMix II