Specifications

‘preset’
You can store / recall up to 16 presets.
ALL SETTINGS ARE SAVED INCLUDING ALL PARAMETERS FOR EACH INPUT SEPARATLY!
Please note:
Changes made in the settings will be lost at power off unless saved in a preset!
With check boxes you can indicate how the unit will behave at power-up. You can choose one of the
presets to load at start-up or the last loaded preset. In the SYSTEM / GPIO menu you can assign a
GPI to load up to 2 presets with external contact closures. Be aware that also this setting is stored in
a preset! Loading a different preset by means of a contact closure without a contact assigned will
switch this off!
All settings are stored in memory with a battery back-up. This battery will last at least 5 years under
normal conditions. The battery is a widely available type CR2032 or equivalent that is commonly used
in PC’s for the same purpose. A qualified technician can change this (internal) battery.
In the event of a firmware upgrade all settings will be lost. It is recommended to write down your
basic settings and keep these in a safe place.
MAIN SCREEN
‘LOGIN’ The eela audio logo hides a login screen
A login code gives access to the system settings and / or channel configuration
as well as enables the user to store presets. Once logged in you can log-off in the
same way. The factory default password is “0000” . You can simply change this
in the “change passw” screen. The password can be up to 15 characters long.
Eela Audio D4 manual
11