Product manual

DE285 HD Caption Decoder/VANC Monitor
3.2. System Setup
LCD Display
å Contrast
Sets the contrast level of the display screen. The
value ranges from 0 (lightest) to 20 (darkest). Use
the UP and DOWN keys to make changes. When
you are finished making changes, use the ENTER
key to exit the menu and save changes, or the
CANCEL key to exit the menu and reject changes.
å Backlight
Sets the brightness level of the display screen’s
backlighting. The value ranges from 0 (darkest)
to 50 (brightest). Use the UP and DOWN keys
to make changes. When you are finished making
changes, use the ENTER key to exit the menu
and save changes or the CANCEL key to exit the
menu and reject changes.
Network
å IP Address
Sets a fixed network address for the unit on your
LAN. Use the LEFT and RIGHT keys to move the
cursor between digits and the UP and DOWN
keys to change the selected digit. When you are
finished making changes, use the ENTER key to
exit the menu and save changes or the CANCEL
key to exit the menu without saving.
å Subnet Mask
The subnet mask should be set to match the bit
mask used on your LAN.
å Gateway
The gateway should be set to the address of
the computer or device that the unit will use to
communicate outside of your local network.
Version
Provides version information about the unit,
including build number and firmware version.
10 Copyright ©2009-2011 EEG Enterprises, Inc.
All rights reserved.