User manual

EE Bright Box User Manual
156
Description of Intrusion Detection settings:
The table below contains a description of the settings on the Intrusion Detection page :
Section
Description
SPI and Anti-DoS firewall
protection
This option allows you to configure the SPI and Anti
Denial of Service protection on the router firewall.
By default the SPI firewall and Anti-DoS setting is
enabled to protect your router and network
Select ‘Enable’ to switch on SPI (Stateful Packet
Inspection) firewall and Anti Denial of Service
settings on the router. Selecting this option will tick
all of the individual SPI service rules.
Select ‘Disable’ to switch off the SPI and Anti Denial
of Service protection on the router. Selecting this
option will untick all of the individual SPI service
rules.
TCP Connection
This option enables or disables the SPI firewall for all
TCP (Transmission Control Protocol) traffic.
UDP Session
This option enables or disables the SPI firewall for all
UDP (User Datagram Protocol) traffic.
FTP Service
This option enables or disables the SPI firewall for all
FTP (File Transfer Protocol) traffic.
H.323 Service
This option enables or disables the SPI firewall for all