User`s guide

MaxLoader User’s Guide
44
NOTE: The feature allows users to program a certain area that might contain
a serial number in the memory device with serialized number by a certain value.
Start : Start address of memory that contains serialized data
End : End address of memory
Inc Value : This value will be added to the previous data value
User must click on Auto Increment to program a memory with data increased
by one to the previous data.
File
MaxLoader uses three different file types: BINARY, ALL HEX, and . POF. In
the file type box, a file type can be selected and loaded to the buffer or saved
onto a disk. The default file type is the Binary file. The All HEX files can be
chosen by maneuvering the arrow button. All HEX files include INTEL HEX
(MCS-80/86/386, MOTOROLA S (1-9), Tektronix HEX and ASCII HEX. OPF
(Programmer Object File) is a binary file generated by Altera assembler
(Quartus and MAX+PLUS II). This file should be loaded for Altera MAX or
EPC family devices only.
 Binary Format
Binary format does not specify the address or checksum of the file. The file
contains the actual binary data. An example of this format is a DOS