User`s guide

MaxLoader User’s Guide

(Ending Address –Starting Address + 1)

• Free Disk : Check the free disk space for a big size E(E)PROM

programming.

• Adapter : Optional Adapter Name for Non-standard devices

• Pins : Number of device pin

• File : Current working directory path and file name after

loading a file

Counter

• Devices/HR : Displays the estimated number of devices that can be

programmed per hour. This feature can only be used

when choosing the Program or Auto selection under

the Device button.

• Success: This number indicates the device programmed

successfully.

• Failure: This number indicates the number of device

programming errors that occur during a programming cycle.

These could be either Blank Checking, Programming, or

Verification error.

• Count: This number indicates all devices executed successfully and

unsuccessfully.

NOTE: This feature is useful for repeat programming on the same

device. You can make an estimate time to perform the programming job

and see the successful and failed devices after finishing the Program or

Auto Repeat programming routine.