User`s guide

MaxLoader User’s Guide

7. Click on the Program button. The part will be programmed and verified

automatically. If no error messages appear during the Programming or

Verification process, your duplicating work is done successfully. You have a

duplicated Intel 27C256 part from AMD 27C256 chip.

6. MAXLOADER OPERATIONS

This section describes the operation of the software. The Main standard

system-menu is divided into four display areas: Main operation menu screen,

Option Information, System information, and counter.

Basic Menu Screen Information

Option Information

• Gang Size : Current socket size when MaxLoader is used

• Split : Current world format for split programming

• Enc Mode : Enable or Disable Encryption mode for

Microcontrollers

• Base Port : Current parallel port address

• Check-Sum : Check-Sum number of the data in current buffer

• H/W Rev : Hardware revision number for your programmer

• S/W Rev : Current MaxLoader software revision number

• Serial No : Serial number of MaxLoader hardware

(Additional Option Information for Non PLD Devices)

The following information presents programming information of the selected

device.

• Algorithm : Programming Algorithm

• Vccp : Main Power Supply Voltage

• Vpp : Programming Power Supply Voltage

• Tpwp : Programming Pulse Width

System Information

• Device Name : The current device number with manufacturer name

• Device Size : The size of device in HEX value