User`s guide

MaxLoader User’s Guide
39
Programming an EPROM with data
We selected an AMD 27C010 EPROM to show you how to program an
EPROM. The 27C010 EPROM needs to be erased (blank) before this
procedure begins.
NOTE: EPROMs have a quartz window that can be erased by exposing the
EPROMs to Ultra-Violet (UV) light. Erasing an EPROM usually takes 10-30
minutes.
1. Click on the MaxLoader icon in your desk top menu after installing the
MaxLoader.
2. Check the optional configuration before programming begins.
3. Click on the Select button. There are two different ways to select the target
device from the menu: 1) by choosing the device manufacturer type using the
arrow keys or 2) by typing the manufacturer and the device names on NAME
box. MaxLoader will display the names of the devices that have the best match
to your input. After selecting the device, the detailed device information box is
provided below the select menu screen.