User`s guide

MaxLoader User’s Guide
17
8. Execute Maxloader and select your programmer model name. ( Config / Select
product )
NOTE: Watch the model name in left-up corner screen and the
TopMaxII won’t be ready if “DEMO mode” appears in the screen.
Before click on the max loader icon, Check the USB cable and turn on
the AC switch in the back side of unit and make sure that you select your
product model name in “Config / Select product” menu.
Please contact support@eetools.com for your further question.
USB driver installation in PC( Windows 98, SE, ME, 2000, and XP)
1.Make sure a programmer is not connected when turning on your computer.
NOTE: If you see New Hardware Wizard screen then disconnect your
programmer. You cannot install programmer software that way.