User`s guide

MaxLoader User’s Guide

1. Install the ml.exe from CD or download from www.eetools.com. (Do not

plug-in your programmer in an USB port at this time).

NOTE: If you see New Hardware Wizard screen and disconnect your

programmer. You are not able to install programmer software in this way.

2. Insert the CD-ROM from factory (EE Tools) in your CD-ROM or DVD

driver.

3. Wait until you see this screen then Click on Device Programmers and

choose a programmer name. The executable file name for the installation is in

the CD-ROM.

4. For USB drivers all programmers will be generated in the following

locations in your PC after installing the ml.exe.

C:\program files\EE Tools\Drivers\x86 (for 32-Bit CPU size) or C:\program

files\EE Tools\Drivers\x64 (for 64-Bit CPU size) . Or you can find the USB

driver files in the CD-ROM comes in the product package.

5. Connect a USB cable between programmer and your computer and turn the

power switch ON after connecting the power cord in the programmer.