Cut Sheet

Specifications
Electrical
Required transformer Class II, 9 VAC, 3.34A, 60 Hz (60-899, 60-899-CN in Canada)
Fuse Non-replaceable transformer fuse
Backup batteries 6 VDC, 1.2 Ah lead acid (60-914)
Backup time 24 hours (fully charged)
Battery test 10 seconds under load every 4 hours
Radio receiver
Type SAW-controlled superheterodyne
Frequency 319.5 MHz/ Bandwidth 350 kHz
Sensitivity 110 dBm nominal
Nom. range without GSM module present 1000-ft. open-air receiving range
Nom. range with GSM module present approx. 500-ft. open-air receiving range
Telephone/modem
Dialing DTMF or pulse
Modem Modified Bell 103 (110 or 300 bps)
Telephone interface Line seizure relay
Inputs/outputs
Total input zones 40 or 38 wireless and 2 hardwire (normally-closed loop only)
Auxiliary power Unregulated 5.1 to 12 VDC; power-limited to 250 mA (maximum) @ 10 VDC
Siren output 1 Hardwire Interior Siren (5.1 to 9 VDC)
Environmental
Operating temperature 32 to 122°F (0 to 49°C)
Relative humidity 90% max., non-condensing
Physical
Color White
Dimensions (LxWxD) 5.7 x 7.05 x 2.1 in. (144 x 179 x 53 mm)
Weight, without battery 1.0 lb. (454 g)
Installation Wall mount
Construction, chassis ABS
Physical
FCC Part 15, Part 68
UL 985, 1023, 1635/ULC Listing ORD-C102319-74,ULC-S545-M89
CSFM California State Fire Marshall
CP01
Ordering Information
Simon XT Packages
80-632-3N-XT Simon XT starter package without X10
80-517-3N-XT
Simon XT 3/1/1 SAW package A5 without X10
80-649-3N-XT
Simon XT Crystal package C5 without X10
80-649-3D-XT-GSM-TM
Simon XT 3/1/1 Kit w/Z-Wave, GSM for T-Mobile Network
80-649-3N-XT-TS-TM
Simon XT w/Two-Way Talking Touch Screen & GSM Kit
80-649-3N-XT-TS
Simon XT w/Two-Way Talking Touch Screen