Cut Sheet

ManualsBrandsEdwards ManualsBoxes & EnclosuresBOX SURFACE Red

Page 1 of 6 D A T A S H E E T S85001-0341

Not to be used for installation purposes. Issue 6.1

Edwards Signaling Catalog u Strobes, Horns, Bells, Chimes

06-27-13

Standard Features

• UL 1971-listed synchronizing strobe

Integrity strobes synchronize to the latest UL 1971 require-

ments when used with a synchronization source.

• Adjustable Audible Output

Select temporal or continuous tones, and High setting for 98

dBA output or Low setting for 94 dBA sound output.

• Genesis-compatible

All Genesis and Integrity strobes on the same circuit meet UL

1971 synchronization requirements when used with an external

control module.

• Approved for public and private mode applications

UL 1971-listed as signaling devices for the hearing impaired

and UL 1638-listed as protective visual signaling appliances.

• Durable red or white Noryl front plate

Ideal for outdoor, industrial or harsh environments.

• Field changeable ﬁeld markings

Lens language or standard “FIRE” marking is easily changed

with optional 2440KTW and 2440KTC series lens kits.

• Easy Installation

Flush mount to standard North American 4” square or two-

gang box. Integrity’s universal mounting plate allows it to be

wired and then left hanging free for easy inspection and testing

before it is fastened to the electrical box.

Overview

Integrity temporal horns and temporal horn-strobes are specially

designed for use with compatible life safety communication and

control equipment to alert occupants of a life safety event. The

horn emits a piercing low frequency sound that is easily heard

above moderate ambient noise levels. The ﬂash from its strobe

can be noticed from almost any position in the room, corridor, or

large open space.

Integrity’s rugged plastic housing is made from durable and ﬁre

retardant, high impact plastic with a slightly textured surface. Its

ingenious mounting plate ﬁrmly holds the device in place with a

single screw. A separate trim plate is not required. Terminals ac-

cept up to #12 AWG (2.5mm²) wire for polarized connections.

Strobes are shipped with standard wall mount style “FIRE” lens

markings. Where ceiling orientation, other languages, or different

lens markings are required, Edwards offers optional 2440KTW and

2440KTC series Lens Marking Kits. These optional lens markings

simply snap on to the strobe. Consult Edwards for availability of

special lens markings.

Integrity horns and horn-strobes are designed for 16 to 33 Vdc

operation and must be connected to signal circuits that output a

constant (not pulsed) voltage. A diode is used to allow full signal

circuit supervision.

Temporal Horns

and Horn-strobes

2400 Series

MEA

Patented

Summary of content (6 pages)

PAGE 1
Edwards Signaling Catalog u Strobes, Horns, Bells, Chimes Temporal Horns and Horn-strobes 2400 Series MEA Patented Overview Standard Features Integrity temporal horns and temporal horn-strobes are specially designed for use with compatible life safety communication and control equipment to alert occupants of a life safety event. The horn emits a piercing low frequency sound that is easily heard above moderate ambient noise levels.
PAGE 2
Application NOTE: The installation of visible and audible signals are subject to national and local standards, codes, and ordinances. Consult your Authority Having Jurisdiction for device installation requirements, application standards, and minimum performance specifications. Horns During installation, the horn is configured for steady or temporal tone signal and either low (94 dBA) or high (98 dBA) output.
PAGE 3
Typical Wiring Strobe Operating Current (RMS) The strobe must be connected to signal circuits which output a constant (not pulsed) voltage. The horn can be connected to continuous voltage circuits. UL Rating 16 Vdc 16 Vfwr Typical Current 24 Vdc 24 Vfwr 15/75 cd 110 cd 150 210 329 420 15/75 cd 110 cd 90 128 180 260 Vdc: Volts direct current, regulated and filtered Vfwr: Volts full wave rectified Current Draw Notes and Comments 1. Current values are shown in mA. 2.
PAGE 4
Light Output Patterns 15 cd (-5A) Series Strobes 15/75 cd (-7A) Series Strobes 30 cd (-3A) Series Strobes 75 cd (-4A) Series Strobes 110 cd (-8A) Series Strobes Horizontal Output Horizontal Output Horizontal Output Horizontal Output Horizontal Output degrees degrees degrees degrees -30 -45 -60 0 -15 15 30 45 60 75 -75 90 -90 30 20 10 cd 10 20 30 -30 -45 -60 -75 -90 100 50 Vertical Output 30 -90-75 30 90 75 60 Average 30 45 60 75 -75 90 -90 60 40 20 cd 20 40 60 Vertical Output Ver
PAGE 5
Ordering Information Catalog Number Description Temporal Horns 2447TH-R* Temporal Horn, Red Temporal Horn-Strobes 2452THSTemporal Horn-Strobe, 15/75cd, Red 15/75-R* 2452THSTemporal Horn-Strobe, 110cd, Red 110-R* Mounting Accessories 2459-SMB-R* Surface Box, Red, Indoor 2459-WPB-R* Weatherproof Box, Red, Surface Ship Wt., lb. (kg) 1.7 (0.8) 2.0 (0.9) 1.5 (0.7) * Replace R with W for white housings.
PAGE 6
Contact us... Phone: 1-800-336-4206 Web: www.edwardssignaling.com Edwards Signaling is an EDWARDS brand. 3 Farm Glen Boulevard Farmington, CT 06032 In Canada, contact Chubb Edwards... Email: inquiries@chubbedwards.com Web: www.chubbedwards.com © 2013 UTC Fire & Security Americas Corporation, Inc. All rights reserved. Specifications subject to change without notice. Edwards is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation.