Cut Sheet

www.edwardssignaling.com
12-85
TM
FIRE ALARMS
12
Conventional and Addressable Accessories
Door Holders
1500 Series
The Edwards 1500 Series electromagnetic door
holders feature housings finished with durable
baked polyester powder paint. The floor or wall
section houses the electromagnet while the
contact plate attaches to the door. The contact
plate has a shock absorbing nylon (swivel) ball
that allows the plate to adjust to any door angle.
Floor units are available in single-door or double-
door (back to back) versions. Wall units are
available in flush or surface mounted versions.
If power fails, doors are released automatically but
may be opened or closed manually at any time. All
units are free of moving parts, are self-contained
and require no maintenance.
The device holders hold a door open while
energized. When de-energized by a relay
controlled by the fire alarm system or other switch,
the door is released to a closed position.
Features and Specifications
• Floorandwallmountedstyles
• Bakedpolyesterpowderpaintfinish
• Lowpowerconsumption
• Silentoperation
• 25Lbf(111N)nominalholdingforce
• Adjustable,swivelcontactplate
• Single-doorordouble-door(backtoback)
versions–floormounted
• Flushorsurfacemountedversions–
wall mounted
• Operatingtemperaturerange:32°Fto120°F
(0°C to 49°C)
Ordering Information
Description Cat. No. Operating Voltage
1
Current
Floor Mounted (Single Door) 1501-AQN5 24V AC; 24V DC/120V AC 0.015 A
Floor Mounted (Double Door) 1502-AQN5 24V AC; 24V DC/120V AC 0.015 A
2
Flush Wall Mounted
(Long Catch Plate)
1504-AQN5 24V AC; 24V DC/120V AC 0.015 A
Flush Wall Mounted
(Short Catch Plate)
1505-AQN5 24V AC; 24V DC/120V AC 0.015 A
Surface Wall Mounted 1508-AQN5 24V AC; 24V DC/120V AC 0.015 A
Completely Flush Wall Mounted 1509-AQN5 24V AC; 24V DC/120V AC 0.015 A
1
AC voltage frequency is 60 Hz
2
Draws 0.015 A per side
120°F
32°F
OP TEMP
MEA
Accessories
Description Cat. No.
Catch plate extension assembly, 1.5” 1500-1
Catch plate extension assembly, 2.5” 1500-2
Catch plate extension assembly
(5.25 to 7.5 inches)
1500-7
Catch plate extension assembly
(7.5 to 12 inches)
1500-12
Replacement armature - short
(for use with 1501, 1502, 1505,
1508 and 1509 door holders)
CS2595-5
Replacement armature - long (for use
with 1504 door holder)
CS2598-5
AC/DC