Owner manual

P/N 3100179 ISSUE 1PAGE 3
BYTE BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0
0 DON'T DON'T DON'T DON'T DON'T LED 3 LED 2 LED 1
CARE CARE CARE CARE CARE 1 = ON 1 = ON 1 = ON
0 = OFF 0 = OFF 0 = OFF
1 0 0 1 DON'T DON'T LED 3 LED 2 LED 1
45 CARE CARE 1 = FLSH 1 = FLSH 1 = FLSH
FPM 0 = STDY 0 = STDY 0 = STDY
1 0 1 0 DON'T DON'T LED 3 LED 2 LED 1
60 CARE CARE 1 = FLSH 1 = FLSH 1 = FLSH
FPM 0 = STDY 0 = STDY 0 = STDY
1 1 DON'T DON'T DON'T DON'T LED 3 LED 2 LED 1
80 CARE CARE CARE CARE 1 = FLSH 1 = FLSH 1 = FLSH
FPM 0 = STDY 0 = STDY 0 = STDY
1 0 0 0 DON'T DON'T LED 3 LED 2 LED 1
80 FPM 80 FPM 80 FPM CARE CARE 1 = FLSH 1 = FLSH 1 = FLSH
DEFLT DEFLT DEFLT 0 = STDY 0 = STDY 0 = STDY
2 0 0 0 0 Sounder Tone Tone Tone
1 = ON MSB LSB
0 = OFF
Output to the base with the poll command from master node.
Data Byte 0 value indicates the LEDs to be turned ON or OFF.
Data Byte 1 value indicates the ON LEDs to be Steady ON or Flashing and the Flashing rate (45, 60 or 80 flashes per
minute) selected.
Data Byte 2 value indicates the sounder to be turned ON or OFF and the tone to be chosen.
2.0 Standard Objects.
2.1 Identity Object (Class ID = 1).
There is a single instance of the identity object for the Chameleon DeviceNet Status Indicator. No class attributes
are supported. All of the instance attributes are contained in rom and are gettable but not settable. The table
below shows the values.
ATTRIBUTE ACCESS DATA
ID RULES NAME TYPE VALUE
1 Get Vendor Code Uint 0x201 (513)
2 Get Product Type Uint 0x0000
3 Get Product Code Uint 0x0001
4 Get Revision Word 01.01
5 Get Status UDINT 0x0000
6 Get Serial # Uint UNIQUE SERIAL #
7 Get Product Name STRUCT 102
Identity Object Services:
SERVICE SERVICE CODE PARAMETERS
Get Attribute Single 0x0E Attribute ID
Reset 0x05 0, 1