Product Manual B

2
Shop Press • Signal Word Panel
3
Danger Panel Warning Panel
Electrical Hazard
This is the electrical hazard symbol. It indi-
cates there are dangerous high voltages
present inside the enclosure of this product.
ONLY qualied, authorized, maintenance,
service or Certied Electricians should gain
access to electrical panel.
Lockout Power
Danger circuits are live. Lockout/Tagout the
upstream power source.
Lockout / Tagout machinery according to
Employer procedures.
Shear/Crush Hazard
Moving parts can cut and crush. Keep
hands clear while operating. Lockout
power before servicing. Immediately
replace guards after adjustment, repair or
service.
Wear Personal Protective
Equipment
To avoid physical hazard, always wear per-
sonal protective equipment. Wear protec-
tive eyewear, clothing, gloves, footwear,
head-gear and hearing protection while
operating or servicing this machinery.
Fluid Injection Hazard
Hydraulic hoses and cylinders are under
pressure. Pressurized uid can pierce skin
and cause severe injury. To avoid physical
hazard, always wear personal protective
equipment. Keep hands clear while oper-
ating. Lockout power before servicing.
Immediately replace guards after adjust-
ment, repair or service.
Do Not Operate With Guard
Removed
Physical barriers and guards have been
designed and installed to protect the
Operator from moving parts that can pinch,
cut and crush. Keep hands clear while
operating. Lockout power before servicing.
Immediately replace guards after adjust-
ment, repair or service to moving parts.
Shear/Crush Hazard
Moving parts can cut
and crush.
Fluid injection Hazard
Hydraulic fluid is
under pressure.
Hydraulic fluid powers
moving parts.
Keep guards in place
Hydraulic accessory
controls powered
by
Ironworker/Porta-Power.
Lockout power
at
Ironworker/Porta-Power
before servicing.
Read, understand, and follow all
labels shown on the machine
and described in the:
• Safety Instructions Manual
• Installation Manual
• Operations Manual
• Maintenance Manual
Keep all manuals close for easy
reference.
Trained and authorized
personnel are to install, operate
and service this machinery. Do
not allow for operation of the
machine by unqualified
personnel.
Personal protective equipment
must be worn at all times during
machinery operation.