User's Manual

6
Firmware Upgrade
1. Download & Extract compressed “ rmware xxxxxx-MS079"
from http://www.edu-science.com/downloads.php?type=software
2. Turn o the Wire (Wireless IP Wi Digital Microscope)
3. Connect the USB cable from the ”Wireless IP Wi Digital Microscope” to the PC.
4. Press and Hold the "LED" button for 5 seconds while selecting the "wi" mode.
5. Upon successful installation, a new Hard Disk Drive will be shown as "System" & "Application"
6. Delete all les in the "System's" in the Hard Disk Drive
7. Copy and Paste the compressed "rmware xxxxxx-MS079" les to the "System"
8. Turn o the “Wireless IP Wi Digital Microscope”
Firmware Upgrade