User's Manual
How to connect with USB and WiFi
2
Blue Light Flashing
SSID: Camera-ESL-
xxxxxx
Password: 88888888
IP viewer
Open a web browser and enter the address
in the address bar, then hit Enter.
To avoid interference with other hardware
change the Camera name/ Password/ Channel ,
click save and reboot button.
Please wait to reboot and try to follow these
steps to reconnect.
1. Reboot Wi microscope to take eect
2. Connect to wireless network
with SSID - New camera name/ New password
3. Browse http://192.168.100.1
Address:
http://192.168.100.1
WiFi MODE
1
2
Capture
LED ON / OFF
* Recommended to connect a maximun 4 devices at the same time.
SSID:
Camera-ESL-xxxxxx
(Series No)
Password: 88888888
After switch to WiFi mode, the unit will be ready for
connecting till Blue Light Flashing
xxxxxx