Certifications 2

EDSYN GMBH EUROPA
Zentrum für Löt- und Entlötsysteme
EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim
12.04.2019
EDSYN GMBH EUROPA • D-97892 Kreuzwertheim • Finkenweg 2 •  (09342) 6413 

 (09342) 6417
Hand protection:
Material Material thickness Breakthrough times of the glove material
these information are not available
these information are
not available
these information are not available
Respiratory protection:
Environmental exposure controls:
Wear suitable gloves.
Chemical protection gloves are suitable, which are tested according to
EN 374.
Check leak-tightness/impermeability prior to use.
In the case of wanting to use the gloves again, clean them before taking
off and air them well.
In case of inadequate ventilation wear respiratory protection.
Particulate filter device (EN 143).
Use appropriate container to avoid environmental contamination.
Keep away from drains, surface and ground water.
9.) PHYSICAL AND CHEMICAL
PROPERTIES
9.1.) Information and basic physical and
chemical properties
Appearance
Physical state:
Form:
Colour:
Odour:
Odour threshold:
Other safety parameters
pH (value):
Melting point/freezing point:
Initial boiling point and boiling range:
Flash point:
Evaporation rate:
Flammability (solid, gas):
Explosion limits of dust clouds:
Vapour pressure:
Density:
Vapour density:
Relative density:
Solubility(ies)
Water solubility:
solid
solid matter
copper
odourless
these information are not available
these information are not available
these information are not available
2.500 °C
not applicable
these information are not available
non-combustible
not determined
these information are not available
8,930
g
/
cm
³
these information are not available
these information are not available
these information are not available