Safety data sheet

EDSYN GMBH EUROPA
Zentrum für Löt- und Entlötsysteme
EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim
14.02.2013
EDSYN GMBH EUROPA • D-97892 Kreuzwertheim • Finkenweg 2 •  (09342) 6413 

 (09342) 6417
Material Safety Data Sheet - according to directive 91/155/EWG
INTERNATIONAL STANDARD NORM ISO 11014-1
Trade name: SU35100 Solder wire Sn62Pb36Ag2 Flux F-SW 34
DIN EN 29 453 NF EN 29 454.1
1.) MANUFACTURER
Address:
EDSYN GMBH EUROPA
Finkenweg 2 Tel.: 09342 - 6413
D 97892 Kreuzwertheim Fax: 09342 - 6417
2.) HAZARDS IDENTIFICATION
2.1) Classification and general hazards
R-phrases:
Fire hazard:
NFPA-code:
2.2) Environmental hazards
Ecology - general:
Ecology - water:
Ecology - waste materials:
2.3) Other dangers
Other dangers:
The information in this section is applicable on all mentioned identified
uses in this SDS.
Not classified dangerous in accordance with Directives 67/548/EEC and
1999/45/EC.
In normal conditions of use, the substance cannot be released because of
the form in which the product is placed on the market.
(Wire does contain a warning symbol for handling: Warning! Contains lead
Xn: Harmful).
None
1-1-0
Not biodegradable and may therefore not be disposed in the environment.
Flux used for solder wire is readily biodegradable - Metals are not
biodegradable and may therefore not be disposed in the environment.
Do not discharge into surface water - Do not discharge into the sewer -
Recycle/reuse – Packaging containing residues of or contaminated by -
dangerous substances - LWCA (the Netherlands): KGA category 05 -
Hazardous waste (91/689/EEC).
This product may become hazardous in use and the information in this
data sheet reflects the hazards associated with solder operations.
Increased danger of lead pollution if the metal is overheated or if the metal
is oxidized (risk of formation of dust and fumes). Lead oxides are classified
as toxic to reproduction (EC). Swallowing of metal alloys is harmful to
health.
3.) COMPOSITION / INFORMATION ON
INGREDIENTS
Name:
EC N°:
REACH:
F-SW-34 SnPb(Ag)
All components are EINECS listed.
All components are pre-registered according to REACH regulations.
Components CAS N° EC N° WEIGHT % Classification
lead, in
massive state
7439-92-1 231-100-4 *) -
tin 7440-31-5 231-141-8 *) -
silver 7440-22-4 231-131-3 *) -
flux
incorporated
- - 1.4 ± 0.2 -
*) Weight dependend on the respective alloy (see alloy overview)
Alloys Tin % wt Lead % wt Silver % wt
Sn62 62 ± 0.5 Rest 2 ± 0.2-