Certifications 2

EDSYN GMBH EUROPA
Zentrum für Löt- und Entlötsysteme
EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim
11.07.2019
EDSYN GMBH EUROPA • D-97892 Kreuzwertheim • Finkenweg 2 •  (09342) 6413 

 (09342) 6417
9.) PHYSICAL AND CHEMICAL
PROPERTIES
Form:
State:
Colour:
Application:
Wire
Solid
Silver
For soft soldering
Properties
T° solidus
(°C)
T° liquidus
(°C)
Density
(g/cm³)
Sn99,3Cu0,7
E 227
7,30
Properties of fluxes
Acid number
(mg/g)
Chloride content (%)
F
-
SW32
392
à
432
0
10.) STABILITY AND REACTIVITY
Stability:
Conditions to avoid:
Hazardous decomposition products:
Materials to avoid:
Stable under normal conditions of use and storage.
Strong oxidisers may cause violent reaction. Mechanical and thermal
operations giving rise to dusts or fumes without appropriate ventilation.
No hazardous decomposition under normal conditions of use.
Due to the toxic properties of lead salts, avoid accidental contact with
acids, particularly with acetic acid.
11.) TOXICOLOGICAL INFORMATION
Eye contact:
Skin contact:
Inhalation:
Acute toxicity:
Toxicological analyses:
May cause eye irritation due to the fumes during soldering.
May cause skin irritation in case of flux projections or fumes during
soldering. It is recommended to wear cotton gloves to prevent burns by
projections.
Use of product during soldering may produce or release fumes due to
heated rosin, which can be sensitizing to asthmatic workers.
No adverse health effect is expected under normal conditions of use.
This good is not concerned in its final shape.
12.) ECOLOGICAL INFORMATION
General notes:
Do not allow product to reach ground water, water course or sewage
system. Sn/Cu alloy is a particularly corrosion proof metal.
13.) DISPOSAL COSINDERATIONS
Surplus and wastes:
Contaminated packaging:
Disposal must be made according to official regulations.
Collect all wastes.
Never use packaging for another purpose.