Certifications 2

EDSYN GMBH EUROPA
Zentrum für Löt- und Entlötsysteme
EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim
11.07.2019
EDSYN GMBH EUROPA • D-97892 Kreuzwertheim • Finkenweg 2 •  (09342) 6413 

 (09342) 6417
After inhalation:
After skin contact:
After eye contact:
After swallowing:
Ingestion:
Take affected persons into fresh air. If irritation persists, get medical
attention. In case of large quantities inhaled, remove from the exposure
area. Wash nose and lips.
Immediately wash with water and soap and rinse thoroughly. If skin
irritation persists, get medical attention. If burns should occur from molten
metal, treat for burn and get medical assistance if necessary. No known
hazardous reaction, wash with water and soap.
Rinse opened eye for several minutes under running water. Get medical
attention if irritation occurs. Flush thoroughly with clear water; in case of
persisting irritation seek an ophthalmologist.
Call for a doctor immediately. Do not induce vomiting unless directed to do
so by medical personnel.
Seek medical advice.
5.) FIRE FIGHTING MEASURES
Non flammable product
Suitable extinguishing agents:
Extinguishing agents to avoid:
Special hazards caused by the
substance, its products of combustion
or resulting gases:
Protective equipment:
Dry chemical powder, water spray or foam.
Do not use water jet on fire where molten metal is present.
Molten metal produces fumes or vapours that may be sensitizing to
asthmatic persons. Molten metal reacts violently with oxidising agents.
Wear appropriate self-contained breathing apparatus. Do not inhale
combustion gases. Wear full body protective clothing.
6.) ACCIDENTAL RELEASE MEASURES
Person related safety precautions:
Measures for environmental
protection:
Measures for cleaning/collecting:
Additional information:
Remove persons from danger area. Wear protective equipment. Keep
unprotected persons away. Use respiratory protective device against the
effects of fumes/dust: Ensure adequate ventilation. Prefer handle with
gloves.
Do not allow to enter sewers / surface or ground water.
After cooling, collect the released product and store in sealed containers.
Exposure levels indicated in section 8 are relevant to these and other
operations.
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7.) HANDLING AND STORAGE
Handling:
Due to its high density, the product is heavy. Avoid the fall of the product.
Wear protective shoes.
S37 = Wear suitable gloves.
Wash hands after handling.