Certifications 2

ManualsBrandsEDSYN ManualsSoldering AccessoriesSolder, lead-free Reel SAC-LZB 0418 Sn95.5AgCu0.7 100 g 1.74 mm

EDSYN GMBH EUROPA

Zentrum für Löt- und Entlötsysteme

EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim

24. März 2021

EDSYN GMBH EUROPA  D-97892 Kreuzwertheim  Finkenweg 2   (09342) 6413



(09342) 6417

4.) FIRST AID MEASURES

4.1.) Description of first aid measures

First aid measures after inhalation:

First aid measures after skin contact:

First aid measures after eye contact:

First aid measures after ingestion:

4.2.) Most important symptoms and effects,

both acute and delayed

Symptoms/injuries:

Symptoms/injuries after skin contact:

Symptoms/injuries after eye contact:

4.3.) Indication of any immediate medical

attention and special treatment

needed

Remove the victim into fresh air. Respiratory problems: consult a

doctor/medical service.

Lead-free solder alloys are not likely to have a harmful effect on the skin.

Wash hands immediately after handling the product. In case of splash

from molten metal, wash affected skin areas with copious amounts of

running water. Further treatmend of the burn. Soap may be used. Take

victim to a doctor if irritation persists.

Rinse immediately with plenty of water. Take victim to an ophthalmologist

if irritation persists.

Dilute stomach contents with water or milk. Do NOT induce vomiting. Ask

for medical advice.

Handle in accordance with good industrial hygiene and safety practice.

The melted product adheres to the skin and causes burns.

In case of splash from hot solder, irritation to the eyes and if not removed,

may result in serious injury. Vapours produced during soldering operations

can give slight irritation of the eye tissue.

No additional information available

5.) FIREFIGHTING MEASURES

5.1.) Extinguishing media

Suitable extinguishing media:

Unsuitable extinguishing media:

5.2.) Special hazards arising from the

substance or mixture

Fire hazard:

Reactivity:

5.3.) Advice for firefighters

Protection during firefighting:

Other information (fire fighting):

D powder. Dry sand.

No water spray.

None.

Upon burning: formation of metallic fumes/vapours.

Heat resistant gloves. Heat/fire exposure: compressed air/oxygen

apparatus.

Massive metal and the oxides are not combustible.