Safety data sheet

EDSYN GMBH EUROPA
Zentrum für Löt- und Entlötsysteme
EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim
25.01.2018
EDSYN GMBH EUROPA D-97892 Kreuzwertheim Finkenweg 2 (09342) 6413
(09342) 6417
5.) FIREFIGHTING MEASURES
5.1.) Extinguishing media
Suitable extinguishing media:
5.2.) Special hazards arising from the
substance or mixture
5.3.) Advice for firefighters
Additional information:
Co-ordinate fire-fighting measures to the fire surroundings.
The product itself does not burn.
In case of fire: Wear self-contained breathing apparatus.
Suppress gases/vapours/mists with water spray jet. Collect contaminated
fire extinguishing water separately. Do not allow entering drains or surface
water.
6.) ACCIDENTAL RELEASE MEASURES
6.1.) Personal precautions, protective
equipment and emergency procedures
6.2.) Environmental precautions
6.3.) Methods and material for containment
and cleaning up
6.4.) Reference to other sections
Provide adequate ventilation. Avoid generation of dust. Do not breathe
dust. Avoid contact with skin, eyes and clothes. Wear personal protection
equipment.
Do not allow to enter into surface water or drains.
Take up mechanically. Treat the recovered material as prescribed in the
section on waste disposal.
Treat the recovered material as prescribed in the section on waste
disposal. See protective measures under point 7 and 8.
7.) HANDLING AND STORAGE
7.1.) Precautions for safe handling
Advice on safe handling:
Advice on protection against fire and
explosion:
Further information on handling:
7.2.) Conditions for safe storage, including
any incompatibilities
Requirements for storage rooms and
vessels:
Advice on storage compatibility:
Further information on storage
conditions:
7.3.) Specific end use(s)
If handled uncovered, arrangements with local exhaust ventilation have to
be used. Do not breathe gas/fumes/vapour/spray.
Not highly flammable.
Avoid contact with skin and eyes.
Keep container tightly closed.
To follow: Storage class:
Protect against direct sunlight.
Surface active agent.
Further information: refer to Technical Data Sheet.