Safety data sheet

EDSYN GMBH EUROPA
Zentrum für Löt- und Entlötsysteme
EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim
22.08.2013
EDSYN GMBH EUROPA • D-97892 Kreuzwertheim • Finkenweg 2 •  (09342) 6413 

 (09342) 6417
explosion:
7.2) Storage:
Technical measures and storage
conditions:
Packing materials:
Requirements for storage rooms and
vessels:
Hints on storage assembly:
Usual measures for fire prevention. Product can burn at use of flame
soldering.
No special protection measures are necessary.
Cans, cartridges
Store in original container in a cool, well-ventilated place.
Keep away from food, drink and animal feeding stuffs.
8.) EXPOSURE CONTROLS / PERSONAL
PROTECTION
8.1) Additional information on plant
design:
8.2) Exposure controls:
Components with occupational
exposure limits resp. biological
occupational exposure limits requiring
monitoring:
Generally a sufficient ventilation is to be foreseen at soldering.
Ingredient
Colophony derivatives
30-45%/weight
No hazardous content.
Solvents mix
60-75%/weight
Surfactants mix
1,0-2%/weight
Thixotropic agents mix
0.5-4%/weight
8.2.1) Occupational exposure controls:
Personal protection equipment:
Respiratory protection:
Hand protection:
Eye protection:
Body protection:
8.2.2) Environmental exposure controls:
8.2.3) Final user exposure controls by
substances released from articles:
No personal respiratory protective equipment normally required.
Tested gloves must be worn:
Suitable gloves type:
One-time gloves, PE (polyethylene), NR (natural rubber, natural latex),
NBR (nitrile rubber)
Breakthrough times and swelling properties of the material must be taken
into consideration. For special purposes, it is recommended to check the
resistance to chemicals of the protective gloves mentioned above together
with the supplier of these gloves.
Eye glasses
Not required.
See section 7. No additional measures necessary.
Not defined
9.) PHYSICAL AND CHEMICAL
PROPERTIES