Safety data sheet

EDSYN GMBH EUROPA
Zentrum für Löt- und Entlötsysteme
EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim
22.08.2013
EDSYN GMBH EUROPA • D-97892 Kreuzwertheim • Finkenweg 2 •  (09342) 6413 

 (09342) 6417
4.) FIRST AID MEASURES
4.1) General information:
4.2) In case of inhalation:
4.3) In case of skin contact:
4.4) In case of eye contact:
4.5) In case of ingestion:
No special information.
In case of inhalation of decomposition products, affected person should be
moved into fresh air and kept still. In case of respiratory tract irritation,
consult a physician.
After contact with skin, wash immediately with soap and plenty of water. In
case of skin irritation, consult a physician.
In case of contact with eye flush immediately with plenty of flowing water
for 10 to 15 minutes holding eyelids apart.
Rinse mouth immediately and drink plenty of water.
5.) FIRE-FIGHTING MEASURES
5.1) Suitable extinguishing media:
5.2) Extinguishing media which must not
be used for safety reasons:
5.3) Special exposure hazards arising from
the substance or preparation itself,
combusting products, resulting gases:
5.4) Special protective equipment fore fire-
fighters:
5.5) Additional information:
Foam, extinguishing powder, CO
2
Water
In case of fire may be liberated: Carbon monoxide, Carbon dioxide or
other hazardous fumes. At soldering with open flame the flux can inflame
and burn. At very high temperatures metal fumes can be set free.
In case of fire: Wear self-contained breathing apparatus.
Do not inhale explosion and combustion gases. Co-ordinate fire-fighting
measures to the fire surroundings.
6.) ACCIDENTAL RELEASE MEASURES
6.1) Personal precautions:
6.2) Environmental precautions:
6.3) Methods for cleaning up:
6.4) Additional information:
Wear personal protection equipment. Provide adequate ventilation.
Do not allow to enter drains / surface water / ground-water.
Take up mechanically, placing in appropriate containers for disposal.
No special information.
7.) HANDLING AND STORAGE
7.1) Handling:
Advices on safe handling:
Protective measures:
Technical measures:
Specific requirements or handling
rules:
Precautions against fire and
Avoid inhalation, skin and eye contact.
So not let the product leak into canalization, waters or ground.
Always close containers tightly after the removal of product.