Certifications 2

EDSYN GMBH EUROPA
Zentrum für Löt- und Entlötsysteme
EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim
24. Mrz. 2021
EDSYN GMBH EUROPA  D-97892 Kreuzwertheim  Finkenweg 2   (09342) 6413

(09342) 6417
Appropriate engineering controls:
Protective and hygiene measures:
Eye/face protection:
Hand protection:
Skin protection:
Respiratory protection:
Environmental exposure controls:
If handled uncovered, arrangements with local exhaust ventilation
have to be used. Do not breathe gas/fumes/vapour/spray.
Remove contaminate, saturated clothing immediately. Draw up and
observe skin protection programme. Wash hands and face before
breaks and after work and take a shower if necessary. When using
do not eat or drink.
Suitable eye protection: goggles.
When handling with chemical substances, protective gloves must be
worn with the CE-label including the four control digits. The quality of
the protective gloves resistant to chemicals must be chosen as a
function of the specific working place concentration and quantity of
hazardous substances. For special purposes, it is recommended to
check the resistance to chemicals of the protective gloves mentioned
above together with the supplier of these gloves.
Breakthrough times and swelling properties of the material must be
taken into consideration. Take recovery periods for skin regeneration.
In the case of wanting to use the gloves again, clean them before
taking off and air them well.
Use gloves only once. Before using check leak
tightness/impermeability.
Additional protection measures for the hands:
Hand protection: DIN EN 374
-CR (polychloroprenes, Chloroprene rubber)
Thickness of glove material: 0,65 mm
penetration time (maximum wearing period): > 120 min.
-NBR (Nitrile rubber)
Thickness of glove material: 0,4 mm
penetration time (maximum wearing period): > 480 min.
Flame-retardant protective clothing. Wear anti-static footwear and
clothing.
In case of inadequate ventilation wear respiratory protection. Use
appropriate respiratory protection. Use only respiratory protection
equipment with CE-symbol including four digit test number. The filter
class must be suitable for the maximum contaminant concentration
(gas/vapour/aerosol/particulates) that may arise when handling the
product. If the concentration is exceeded, closed-circuit breathing
apparatus must be used! Filtering device (full mask or mouthpiece)
with filter: A.
No special measures are necessary.
9.) PHYSICAL AND CHEMICAL
PROPERTIES
9.1.) Information on basic physical and
chemical properties
Physical state:
Colour:
Odour:
liquid
amber
Alcohol