Certifications 2

EDSYN GMBH EUROPA
Zentrum für Löt- und Entlötsysteme
EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim
12. April 2019
EDSYN GMBH EUROPA • D-97892 Kreuzwertheim • Finkenweg 2 •  (09342) 6413 

 (09342) 6417
8.) EXPOSURE CONTROLS / PERSONAL
PROTECTION
8.1.) Control parameters
Occupational exposure limit values
Limit value type
(country of origin)
Substance name
1.
long
-
term occupational exposure limit value
2. short-term occupational exposure limit value
3. Instantaneous value
4. Monitoring and observation processes
5. Remark
IOELV (EU)
tin
CAS-No. 7440-31-5
1. 2 mg/m³
WEL (GB)
tin
CAS-No. 7440-31-5
1.
2 mg/m³
2. 4 mg/m³
IOELV (EU)
silver
CAS-No. 7440-22-4
1.
0,1
mg/m³
5. metal
WEL (GB)
silver
CAS-No. 7440-22-4
1.
0,1 mg/m³
5. metal
8.1.2.)
Biological limit values
8.1.3.) DNEL-/PNEC-values
8.2.) Exposure controls:
8.2.1.) Appropriate engineering controls
8.2.2.) Personal protection equipment
Eye/face protection:
Skin/Hand protection:
Respiratory protection:
8.2.3.) Environmental exposure controls
8.3.) Additional information
No data available
No data available
See section 7. No additional measures necessary.
Eye glasses with side protection
Tested protective gloves must be worn DIN EN 374
Suitable material:
Breakthrough time (maximum wearing time) min. In the case of wanting
to use the gloves again, clean them before taking off and air them well.
Breakthrough times and swelling properties of the material must be
taken into consideration.
If technical exhaust or ventilation measures are not possible or
insufficient, respiratory protection must be worn.
No data available.
No data available.
9.) PHYSICAL AND CHEMICAL
PROPERTIES
9.1.) Information on basic physical and
chemical properties
Appearance
Physical state:
Colour:
Odour:
pasty
grey
earthy