Instructions / Assembly

Bin Cabinets

Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel free to contact our Edsal

manufacturing facility at, (773) 475-3000 and request customer service. We can also be reached on the internet at the following email

address : customerservice@edsal.com.

To obtain replacement parts, please provide the following information :

- Model # - Part # & Description - Location Purchased - Date Purchased

Industrial Products Division

Edsal Manufacturing Company

4400 South Packers Avenue

Chicago, IL 60609

www.edsal.com

Use Caution when handling metal parts. The metal may

have sharp edges or corners. The use of protective

gloves is recommended. This unit should be securely

anchored to a wall with suitable fasteners, and placed on

a level surface. Do not use this unit for anything that is

outside the designed function of storage. DO NOT

OVERLOAD. DO NOT store loose or heavy items on

the top shelves or on the top of the unit, for they create a

falling hazard that can injure yourself or others. DO NOT

stand on or use unit as a ladder. Always remember to

use proper lifting techniques when moving either the

boxed or assembled unit.

Safety Instructions

** See the reversed side for

assembly instructions.

PAGE 1
Bin Cabinets Safety Instructions Use Caution when handling metal parts. The metal may have sharp edges or corners. The use of protective gloves is recommended. This unit should be securely anchored to a wall with suitable fasteners, and placed on a level surface. Do not use this unit for anything that is outside the designed function of storage. DO NOT OVERLOAD.
PAGE 2
Hasp #9867 Qty (1) 1 Handle #HNDL-PUL Qty (2) Qty (2) 1/4-20 x 1/2” Carriage Bolt #F14205CB 1/4-20 Nut #F1420N Qty (2) Door 4 Door Shelves are assembled to the doors with the flange upward. Use (2) 1/4-20 x 1/2” slotted truss head bolts and nuts to fasten the shelves. When loading shelves, always keep the heavier loads toward the bottom and in a balanced state.
PAGE 3
Bin Cabinets Safety Instructions Use Caution when handling metal parts. The metal may have sharp edges or corners. The use of protective gloves is recommended. This unit should be securely anchored to a wall with suitable fasteners, and placed on a level surface. Do not use this unit for anything that is outside the designed function of storage. DO NOT OVERLOAD.
PAGE 4
1 Washers #F14SW Qty (2) 1/4-20 Nut #F1420N Qty (2) Security Hasp Cover Plate #9866 1/4-20 Nut #F1420N Qty (2) Door 4 Door Shelves are assembled to the doors with the flange upward. Use (2) 1/4-20 x 1/2” slotted truss head bolts and nuts to fasten the shelves. When loading shelves, always keep the heavier loads toward the bottom and in a balanced state.